Maybe you are in your home or hotel room and your toilet clogs. Unfortunately, your plunger is missing in action. It is quite an embarrassing moment. Fortunately, you can unclog a toilet without a plunger. It does not matter whether your plunger was lost or you do not want to touch it, these hacks can help you unclog your toilet.
The methods discussed here depend on what you have in your home or bathroom. Each method is discussed but ensures you have a wire hanger, vinegar, baking soda, dish soap, and bath bombs. When your toilet is clogged, you should avoid flushing it repeatedly, particularly if the water keeps rising. In this way, you can avoid having a clogged toilet and flooded water on your bathroom floor. Also, turn off the water supply until you solve the problem at hand.
When the toilet clogs, you can head to the kitchen and get a dish soap. Since the soap is slippery, it can help lubricate your clogged pipe and allow the debris to slide down easily. You can pour about half-cup into your toilet. If you do not have dish soap, then you can chop the bar shop into minute chunks and then drop them into the toilet.
If your dish soap does not unclog the toilet, you should consider adding hot water. Start by filling a bucket with hot water. However, avoid using boiling water as it can make the porcelain to crack. Then pour hot water into the toilet. The idea here is that the force of hot water can get rid of whatever is causing the clog.
Before searching for a way to unclog a toilet without a plunger, you should first determine what causes the blockage. In fact, a severe blockage may require manually removing whatever is causing the clog. Start by unraveling wire coat hanger until it is straight. Then push one end of the wire into the clogged area. Ensure you prod the debris to ensure it is free and easily flows down the drain.
Another alternative to hot water and dish soap is to use an all-natural solution. The right solution is using vinegar and baking soda. After adding it into the toilet, you should leave it to fizz for about one hour. However, if it does not dissipate, try to add hot water.
Before you try this trick, you should note that it can get messy. However, it works when it comes to unclogging your toilet without the need for a plunger. In this case, you begin by getting water out of the toilet bowl. You can refill a small container and then pouring it into a large bucket. Then, refill your plastic bottle with hot water and try to fit it into the bottom outlet of your toilet. Ensure you put on gloves when doing this. Squeeze the bottle to ensure the water inside gets out with a lot of pressure. The difference in pressure can help flush down whatever that is making it unclog.
Although there is no plunger around, a toilet brush may be available. The truth is that it can come to your rescue. Remember to use gloves or cleaning wand the same way you could with a plunger. You will need to toss the brush when you are done and say goodbye to the mess.
When replacing or repairing a toilet, you will have to remove all water. Just shutting off the water supply or flushing will not do the trick. Even though a sponge will work, it is quite slow. Therefore, you should consider using a squirt gun to get the water out and leave a few drops, which the sponge can get out.
If all the above tricks of how to unclog a toilet without a plunger fail, you should seek the help of professionals. In this case, you should contact your emergency plumber. Also, you should consider getting a plunger for your toilet if you do not have one already. When done unclogging the toilet, try flushing the toilet normally. If the method was effective, then it will flush normally.…